Loading...

Produtcs

  • side icons
  • side icons
  • side icons

OXIDIZED 115/15


[Contact us for a price]

In stock

UIB OXIDIZED ASPHALT 115/15

 

HOT APPLIED.

 

DESCRIPTION:

OXIDIZED ASPHALT IS MANUFACTURED FROM CRUDE PETROLEUM BY SUITABLE REFININING TO CONFORM TO THE APPLICABLE REQUIREMENT.

 

USES:

·          USED FOR PROTECTION OF UNDER GROUND CONCRETE, BRIDGES, CULVERTS, RETAINING WALLS, TANKS SURROUNDINGS, DAMS, CONDUITS, DECKS, ETC.

·         OXIDIZED ASPHALT, TYPE V (GRADE 115/15) HAS GOOD RESISTANCE FOR VERTICAL & SLOPED SURFACES UNDER DIRECT SUNLIGHT IN THE TEMPERATURES EXCEEDING 50O C.

·         GRADE 115/15 ASPHALT CAN BE USED IN BUILT UP WATER PROOFING SYSTEM.

·         ALSO USED AS RAW MATERIAL FOR MANUFACTURING OF WATER PROOFING PRODUCTS.

·         AS A MOP COAT FOR DAMP PROOFING.

·         AS A CRACK FILLER IN BLACK TOP SURFACES.

·         EXCELLENT BOND & ADHESION (SEE NOTE ON PRIMING.)

 

PREPARATION:

THE SURFACE SHOULD BE CLEAN DRY & FREE FROM DIRT, DUST, OIL AND GREASE.

 

APPLICATION:

HOT APPLIED USING A TROWEL, STIFF BRUSH OR A MOP.

 

COVERAGE:

RATE OF APPLICATION WILL DEPEND ON ENGINEER’S REQUIREMENT AND MAY VARY FROM PROJECT TO PROJECT. AS A GENERAL RULE TWO COATS ARE APPLIED CONSUMING 1 KG PER SQ. M. PER COAT.

 

STORAGE:

INDEFINITE LIFE IN CLOSED DRUMS.

 

 

 

PACKING:

OXIDIZED ASPHALT GRADE 115/15 IS PACKED IN 200 KGS DRUM AND IN POLYAMIDE BAGS OF 25KG.

 

TECHNICAL DATA

 

PROPERTIES

MIN

MAX

TEST METHOD

SOFTENING POINT – °C

110

120

ASTM D – 36

FLASH POINT –  °C

225

-

ASTM D –92

PENETRATION @   0 °C

                                    25  °C, mm/10

                                    46 °C

-

10

-

-

20

75

 

ASTM D – 5

DUCTILITY AT 25 ° C – cm

-

-

ASTM D – 113

SOLUBILITY IN TRICHLOROCTHYLENE %

-

-

ASTM D - 2042

SPECIFIC GRAVITY

1.00

1.10

ASTM D – 70

 

 

 

HEALTH & SAFETY:

·         CARE SHOULD BE TAKEN WHILE HEATING & HANDLING DURING APPLICATION. STRICTLY RECOMMENDED TO USE PROTECTIVE CLOTHING. GLOVES, MASKS, GOGGLES, ETC.

·         IN THE EVENT OF CONTACT WITH HOT OXIDIZED ASPHALT ON SKIN, IMMEDIATELY APPLY ICE OR COLD WATER AT FIRST INSTANCE FOLLOWED BY SEEKING MEDICAL ADVICE.

·         OXIDIZED ASPHALT IS A NON-FLAMMABLE & NON-HAZARDOUS ITEM.

 

TECHNICAL SERVICES ARE AVAILABLE FOR ASSISTANCE ON ANY SPECIFIC USE AND APPLICATION